15 Gifts For The Sliding Patio Doors Repair Lover In Your Life

15 Gifts For The Sliding Patio Doors Repair Lover In Your Life

Sliding Patio Doors Repair

It is possible for sliding patio doors to be difficult to open and close. This can be caused by various issues, such as dirty tracks or a misaligned slider.

Clean the track first and Lubricating the rollers. You can also adjust the rollers by using the adjustment holes on the bottom of the door panel with movable doors.

Tracks that are damaged or dirty

A sliding door that doesn't slide smoothly could be caused by a dirty or damaged track. Over time dirt, grit and even rust can build up making the track unable to move smoothly. The solution is a thorough cleaning using the use of a brush and mild detergent. It's best to perform this task frequently to ensure the smooth operation of your door and prevent the need for expensive repairs down the road.

A door that is leaking can be a frequent issue. It requires immediate attention in order to avoid water damage, structural deterioration and mold growth. The issue is usually caused by worn weather stripping and a misaligned doors. This can be fixed by replacing the old weather stripping and aligning the doors.

Another common problem that can be resolved with some DIY work is the problem of rollers that veer off the track. This is a task that can be challenging, so ask a friend to assist you. Stand inside the house, and lean a panel toward you to reposition the rollers. Once the panel is lifted off the bottom track, you'll need place it on sawhorses in order to keep it from falling off. Then, loosen the screws that keep each roller in place and take them off with a screwdriver. Now you can remove any dirt stuck between the wheels and tracks. Clean each wheel with denatured alcohol on a rug. Reposition the wheels on their tracks and attach them again.

It is possible to straighten bent track sections with a mallet made of rubber and a block of wood. However in the event that the bent portion is located near the hinges and is likely to cause more damage, you'll be better off calling in an expert to ensure safety.

Rollers that are not aligned

If your sliding door isn't moving as it should it's most likely due to the roller wheels are not aligned with the track. The wheels may be dirty or rusted and their bearings are worn down.  upvc patio door repairs near me  creates friction between the floor of the door and the track, causing it to grind or snag when it's closed or opened. This can also make noises that sound like squeaking.

Fortunately, this is an easy fix. The wheels are attached to an adjustable bracket that can be adjusted, which means you don't need to remove the door. Find the adjustment holes (usually on the opposite side of the frame) and use a screwdriver to rotate the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise movement lowers it. Continue to adjust until the door moves smoothly and quietly when open or closed.

It is important to adjust the wheel prior making adjustments to your latch. For the lock to function properly, the latch hooks must be aligned with the strike plate. If you don't do this, the latch may open or close accidentally even when you're not in the room.

Sliding patio door are an investment. Making sure they are in good condition will ensure the safety of your family. By addressing common issues like faulty tracks, rollers and handles, you can prevent costly repairs in the near future. For assistance with your patio doors, get in touch with our team. We can evaluate your sliding patio door repair needs and help you keep it in good condition. Our experts can also assist with any replacement parts that you might require.

Loose or Damaged Door Frame


Sliding patio doors are a wonderful option for any home and provide a stylish and practical alternative to hinged or swing-open doors for patios. Like other hardware, they may experience various issues in time. A lot of these issues can be fixed with a little DIY expertise.

A gap in the frame is a common issue with sliding patio doors. This could be due to many factors, such as misaligned track or rollers, a damaged door or track or bent door frame. In most cases, the problem can be fixed by removing the doors and attaching the track. It is crucial to be careful not to cause damage to either the frame or track.

In some cases, it may be necessary to replace the entire track, which is easily done with a universal replacement kit that is available at most major hardware stores. These kits are easy to install and will get your door functioning properly again in a matter of minutes.

It is essential to regularly inspect your sliding door's frame and hardware for signs of wear and tear, such as loose screws or bolts. They can usually be tightened with a screwdriver, or wrench, making this an easy and effective DIY patio door maintenance process. Additionally, it is important to grease your rollers and tracks to make sure they operate smoothly and prevent premature wear.

For many homeowners who live in the city, their patio doors are the primary access to their backyard and outdoor living space. In order to maintain comfort and security in the home, it is essential that they function properly. By following these easy DIY maintenance techniques, homeowners can prolong the life of their sliding patio door and reduce costly repairs or replacements.

A faulty handle

Sliding patio doors provide the perfect way to access your backyard and also enter your home, but they can be difficult to operate if they become misaligned or damaged. A faulty handle can also cause the door to get stuck or be difficult to open and close. Fixing a loose handle could be done at home.

In most cases, a handle that is loose is the result of screws that have worked through the backplate. To remedy the issue, tighten the screws on the inside of the handle using the help of a screwdriver. If the handle remains loose, it could be a sign that the threads have worn away and need to be replaced.

A broken latch could be the cause. This is more likely to occur if the latch is made of plastic, not metal. If the latch isn't turning or catching it, try oiling it first to see if this helps. If not, you may require replacing the lock completely.

If the handle is damaged or broken, it could be difficult to use. If this is the case it is necessary to replace it with a brand new handle that is in line with the design of your sliding patio door.

Whether your patio doors are old and outdated or new, Feldco can help you get them back on the right track. We have high-quality doors available in different sizes and styles that can be adapted to fit your home perfectly. Contact us today to learn more about our doors! We provide homeowners with our services throughout Southern California, including Ventura County, Orange County & San Diego County.

Unusual Weatherstripping

It's time to replace your weather stripping if you see light around closed doors and windows or sense a draft pulsing at the window or door. The strips form an airtight seal, which stops unwanted water, air, and pests from getting into your home. They also help keep your heated and conditioned air inside, thereby saving money on energy bills year-round.

It may have lost its positive seal's bouncy and bouncy due to aging. You can easily diagnose this by running a dollar bill under the seal at the top and bottom of the jamb as well as the door frame where they meet. If the dollar bill slides easily between the seal and the door, it's time to replace the weather stripping.

It's tempting to cut off only the worn section of weather stripping and replace it, but this will cause cracks on both sides of the new stripping and may cause problems with the seal in the future. It's more efficient to replace the entire stripping so that you can be confident knowing your door is properly sealed again.

Follow our DIY guide to weather stripping to put the correct material for your sliding patio door and frame to ensure a strong and long-lasting seal. It's a great option to repair your door and save on your energy bills and you shouldn't put off the project until it's too late. Your wallet as well as your home will thank you.